These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Crossover
All Ports Open
Surge Suppressor/Damper Code
None
Solenoid Code
H
AC/DC
DC
Spool Shift Timing
N/A
Electrical Connector Code
None
NFPA Size
D03
Spool Code
0
Housing Code
J
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
Port Restrictor Plugs
None
Valve Type
High-Performance
Design No.
60
Port Restrictor Plug Code
None
Pressure Port Check Valve Pressure
N/A
Coil Type Code
F
Seal Material
Buna-N
Reducer Module
N/A
Pilot/Drain
None
Function Code
0
Electrical Connection
No Connector
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Function
3-Position Spring Centered
Overrides
No Overrides
Pressure [Max]
5075 psi
Solenoid
Double
Solenoid Indicator Lights Code
None
EN Code
None
Coil Rating Code
H
Response Type
Standard Response
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
C
Solenoid Energization Code
None
Port T Code
7
Operation
Solenoid Operated
Voltage & Frequency
24 VDC
Electrical Options
None
Spool Indicator Switch Code
None
Indicator Lights
No
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Center Position
All Ports Open
Mechanical Options
None
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
