These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Indicator Switch Code
None
Design No.
60
Spool Spring Arrangement Code
BL
Valve Type
High-Performance
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Mechanical Options
None
Solenoid Code
B
Indicator Lights
No
Electrical Connector Code
None
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper Code
None
Solenoid Energization Code
None
Rated Flow [Max]
21 gal/min
Coil Rating Code
B
Pilot/Drain
None
Port Restrictor Plug Code
None
Manual Override Option Code
None
Solenoid
Single
NFPA Size
D03
Overrides
No Overrides
Center Position
P Blocked, A & B to T
Port Restrictor Plugs
None
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Function Code
6
EN Code
None
Electrical Connection
DIN 43650
Operation
Solenoid Operated
Surge Suppressor/Damper
None
Housing Code
None
Port T Code
6
Pressure [Max]
5075 psi
AC/DC
AC
Voltage & Frequency
110/120 VAC – 50/60 Hz
Seal Material
Buna-N
Solenoid Indicator Lights Code
None
Coil Type Code
U
Coil Type
DIN 43650
Crossover
P Blocked, A or B to T
Actuator Type
Solenoid
Response Type
Standard Response
Spool Code
6
Function
2-Position Spring Offset, End to Center
Reducer Module
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
