These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Rating Code
B
Function
2-Position Spring Offset, End to Center
Surge Suppressor/Damper
None
AC/DC
AC
Coil Type
DIN 43650
Cycle Rate [Max]
N/A
Spool Indicator Switch Code
None
Overrides
No Overrides
Function Code
6
Solenoid Energization Code
None
Crossover
P Blocked, A or B to T
Reducer Module
N/A
Port Restrictor Plug Code
None
NFPA Size
D03
Spool Spring Arrangement Code
BL
Electrical Connector Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Options
None
Operation
Solenoid Operated
Spool Shift Timing
N/A
Coil Type Code
U
Pressure [Max]
5075 psi
Port T Code
6
Solenoid
Single
Spool Code
6
Mechanical Options
None
Port T Pressure Rating
3000 psi
Manual Override Option Code
None
Solenoid Indicator Lights Code
None
Response Type
Standard Response
Housing Code
None
Indicator Lights
No
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Design No.
60
Valve Type
High-Performance
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
EN Code
None
Seal Material
Buna-N
Port Restrictor Plugs
None
Solenoid Code
B
Electrical Connection
DIN 43650
Pilot/Drain
None
Center Position
P Blocked, A & B to T
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
