These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Electrical Options
None
Function Code
2
Electrical Connection
Connector Fitted
Surge Suppressor/Damper Code
None
Function
2-Position Spring Offset, End to End
Spool Indicator Switch Code
None
Spool Code
2
Design No.
60
Reducer Module
N/A
Solenoid Indicator Lights Code
None
Solenoid
Single
Port Restrictor Plug Code
None
Solenoid Energization Code
None
Valve Type
High-Performance
Operation
Solenoid Operated
EN Code
None
Center Position
All Ports Blocked
Actuator Type
Solenoid
Manual Override Option Code
None
Spool Spring Arrangement Code
A
NFPA Size
D03
Coil Type
Connector Fitted
Crossover
All Ports Blocked
Pilot/Drain
None
Coil Type Code
U1
Port T Code
7
Pressure [Max]
5075 psi
Voltage & Frequency
24 VDC
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Spool Shift Timing
N/A
Electrical Connector Code
None
Pressure Port Check Valve Pressure
N/A
AC/DC
DC
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Mechanical Options
None
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Housing Code
None
Solenoid Code
H
Port T Pressure Rating
3000 psi
Indicator Lights
No
Coil Rating Code
H
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
