These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Coil Rating Code
H
Pilot Valve Type
N/A
Crossover
All Ports Blocked
Function Code
2
Electrical Connector Code
None
Surge Suppressor/Damper
None
Design No.
60
EN Code
None
Housing Code
None
Coil Type Code
U1
Port T Code
7
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Cycle Rate [Max]
N/A
Solenoid Energization Code
None
Reducer Module
N/A
Response Type
Standard Response
Seal Material
Buna-N
Spool Shift Timing
N/A
Solenoid
Single
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Electrical Connection
Connector Fitted
Electrical Options
None
Voltage & Frequency
24 VDC
Port Restrictor Plug Code
None
Port Restrictor Plugs
None
Function
2-Position Spring Offset, End to End
Solenoid Code
H
Solenoid Indicator Lights Code
None
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
None
AC/DC
DC
Pressure [Max]
5075 psi
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Indicator Lights
No
Spool Spring Arrangement Code
A
Operation
Solenoid Operated
Overrides
No Overrides
Center Position
All Ports Blocked
Coil Type
Connector Fitted
Pilot/Drain
None
NFPA Size
D03
Spool Code
2
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
