02-126195

Vickers D05 Solenoid Valve

Item #101974086

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Each installation should be designed so that the heated section of the heater is totally immersed at all times to avoid heater failure and/or possible damage to the fluid in the tank

Specifications

Spool Spring Arrangement Code	B
Port Restrictor Plugs	None
Electrical Options Code	None
Indicator Lights	No
Tank Port Rating	1000
Spool Code	7
Coil Rating Code	B
Operation	Solenoid Operated
Design No.	60
Function	2-Position Spring Centered, End to Center, Single End
Solenoid	Single
Cycle Rate [Max]	N/A
Mechanical Options	Single Solenoid Reverse Assembly
Surge Suppressor/Damper	None
Port T Pressure Rating	1000 psi
Pressure [Max]	3600 psi
Overrides	No Overrides
Reducer Module	N/A
Pilot/Drain	None
Crossover	P to A or B, T & A or B Blocked
Rated Flow [Max]	25 gal/min
Center Position	P to A & B, T Blocked
Response Type	Standard Response
Voltage & Frequency	110/120 VAC - 50/60 Hz
Pressure Port Check Valve Pressure	N/A
Valve Type	Standard-Duty
Model No.	DG4S4-017B-B-60-LH
Seal Material	Buna-N
Mechanical Options Code	LH
Coil Type	Flying Leads
NFPA Size	D05
Flow Direction Code	4
Coil Type Code	None
AC/DC	AC
Electrical Connection	KU W/ Deutsch Connector
Actuator Type	Solenoid
Electrical Options	None
Pilot Valve Type	N/A
Weight	10.0 LB