868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Adjustment Type, Dual	N/A
Gage Port	SAE-4
Interface	D05
Adjustment	Yes
Temperature Range [Min]	32 °F
Actuation Option	Proportional
Pressure [Max]	4500 psi
Remote Control Port	No
Seal Material	Buna-N
Pressure Limited In	Pressure Port
Flow [Max]	32 gal/min
Model No.	DGMC-5-PT-AW-S-30
No. of Stages	Single Stage
Valve Mount Type	Subplate/Manifold Mounted
Design No.	30
Temperature Range [Max]	176 °F
External Drain	No
Pressure Limited In, Dual	N/A
Performance	Standard Performance
Pressure Adjustment Range (psi)	60 to 725
Adjustment Type	Screw
Manufacturer Part No.	DGMC-5-PT-AW-S-30
Pressure Adjustment Range, Dual (psi)	N/A
Port Drained Into, Dual	N/A
Gauge Port Thread Type	SAE
Operating Pressure [Max]	4500 psi
Leakage	Standard
Port Drained Into	Tank Port
Fluid Cleanliness	20/18/15 micron
Family Name	Vickers D05 SystemStak™ Valves
Valve Type	Relief Valve "P" to "T"
Relief Function	Single
External Drain, Dual	N/A
Compatible Fluids	Petroleum Oil
Body Material	Cast Iron
Weight	6.5 LB