868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Valve Mount Type	Subplate/Manifold Mounted
Pressure Adjustment Range, Dual (psi)	N/A
Pressure Limited In	Pressure Port
Gage Port	SAE-4
Model No.	DGMC-5-PT-AW-S-30
Pressure Adjustment Range (psi)	60 to 725
Pressure [Max]	4500 psi
Port Drained Into, Dual	N/A
Fluid Cleanliness	20/18/15 micron
Actuation Option	Proportional
External Drain, Dual	N/A
Gauge Port Thread Type	SAE
Manufacturer Part No.	DGMC-5-PT-AW-S-30
Compatible Fluids	Petroleum Oil
Performance	Standard Performance
Temperature Range [Min]	32 °F
Design No.	30
Pressure Limited In, Dual	N/A
Flow [Max]	32 gal/min
No. of Stages	Single Stage
Temperature Range [Max]	176 °F
Family Name	Vickers D05 SystemStak™ Valves
Adjustment Type, Dual	N/A
Valve Type	Relief Valve "P" to "T"
Adjustment Type	Screw
Port Drained Into	Tank Port
Seal Material	Buna-N
Operating Pressure [Max]	4500 psi
External Drain	No
Adjustment	Yes
Remote Control Port	No
Relief Function	Single
Body Material	Cast Iron
Leakage	Standard
Interface	D05
Weight	6.5 LB