Find a Service Center
- 7/8" Pitch
- XH Belt Type
- 3" Belt Width
- 22 Teeth
- 6.127" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- If the drive has more than three pulleys, every other pulley should be flanged
| Bushing Type | Taperlock |
| Hub Dia. | N/A |
| Finished Bore | N/A |
| Type | KF-1 |
| Belt Width | 3 in |
| Bore Type | Taper-Lock and QD Bushed |
| Bore Range [Min] | 0.5 in |
| No. of Teeth | 22 |
| Hub Projection | 0.94 in |
| Belt Pitch | 0.875 in |
| Pitch Diameter | 6.127 in |
| Belt Size | XH |
| Bushing Series | 2517 |
| Outside Dia. | 6.017 in |
| Bore Range [Max] | 2.5 in |
| Length Through Bore | 1.75 in |
| Weight | 16.4 LB |
| EAN or UPC | 782475088966 |
