Find a Service Center
- 7/8" Pitch
- XH Belt Type
- 3" Belt Width
- 48 Teeth
- 13.369" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Finished Bore | N/A |
| Pitch Diameter | 13.369 in |
| Bore Type | Taper-Lock and QD Bushed |
| Hub Dia. | 8 1/2 in |
| Bushing Type | Taperlock |
| Bore Range [Max] | 4 in |
| Bore Range [Min] | 1.4375 in |
| Type | C-1 |
| Outside Dia. | 13.259 in |
| Bushing Series | 4040 |
| Hub Projection | 0.19 in |
| Belt Width | 3 in |
| Length Through Bore | 4 in |
| Belt Pitch | 0.875 in |
| Belt Size | XH |
| No. of Teeth | 48 |
| Weight | 69.0 LB |
| EAN or UPC | 782475089031 |
