Find a Service Center
- 6 1/2" Maximum Diameter
- 2.8" Stroke Length
- 2" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
features
- Temperature range from -40 °F to 150 °F
- Manufactured by Goodyear
- Maximum inflation pressure 100 psi
- Little space required
- No sealing required
- Maximum tilt angle of 25°
- Provides linear and angular motion
- Provides angular motion
| Compressed Height | 2 in |
| Force @ 9 in Stroke | N/A |
| Force @ Maximum Stroke (80 psi) | 850 lbf |
| Force @ 2 in Stroke | 1500 lbf |
| Temperature Range [Min] | -40 °F |
| Style No. | YI-1B |
| Stroke Length [Max] | 2.800 in |
| Air Inlet Type | NPT |
| Force @ 5 in Stroke | N/A |
| Blind Tap Spacing | 2 3/4 in |
| End Closure | Style 3 End Retainer |
| Force @ 1 in Stroke | 1900 lbf |
| Force @ 12 in Stroke | N/A |
| Air Inlet | 1/4 in |
| Recommended Isolator Design Height [Max] | 4 in |
| Bumpers | w/o Bumpers |
| Convolutions | Single |
| Force @ 3 in Stroke | N/A |
| Force @ 8 in Stroke | N/A |
| Fill Port Offset | 1 3/8 in |
| Pressure [Max] | 100 psi |
| Recommended Isolator Design Height [Min] | 3 in |
| Force @ 4 in Stroke | N/A |
| Temperature Range [Max] | 150 °F |
| End Plate Diameter | 4.15 in |
| Force @ Stroke (80 psi) | 850 lbf @ 3 in, 2000 lbf @ 1 in, 2000 lbf @ 2 in |
| Bellows Type | Single Convolution |
| Force @ 6 in Stroke | N/A |
| Weight | 3.3 LB |
