Find a Service Center
Alternate Products
- 8.7" Maximum Diameter
- 3.3" Stroke Length
- 2" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Convolutions | Single |
| Force @ 3 in Stroke | 1600 lbf |
| Air Inlet | 1/4 in |
| Force @ Stroke (80 psi) | 3450 lbf @ 1 in, 3450 lbf @ 2 in, 2000 lbf @ 3 in |
| Recommended Isolator Design Height [Min] | 3 3/4 in |
| Force @ 2 in Stroke | 2650 lbf |
| Force @ 4 in Stroke | N/A |
| Force @ Maximum Stroke (80 psi) | 1100 lbf |
| Air Inlet Type | NPT |
| Bumpers | w/o Bumpers |
| Style No. | YI-1B |
| Force @ 8 in Stroke | N/A |
| End Closure | Style 2 End Retainer |
| Force @ 12 in Stroke | N/A |
| Compressed Height | 2 in |
| Force @ 6 in Stroke | N/A |
| End Plate Diameter | 5 in |
| Recommended Isolator Design Height [Max] | 4 3/4 in |
| Pressure [Max] | 100 psi |
| Force @ 1 in Stroke | 3300 lbf |
| Bellows Type | Single Convolution |
| Blind Tap Spacing | 2 3/4 in |
| Temperature Range [Max] | 150 °F |
| Stroke Length [Max] | 3.300 in |
| Temperature Range [Min] | -40 °F |
| Force @ 5 in Stroke | N/A |
| Force @ 9 in Stroke | N/A |
| Weight | 4.7 LB |
