Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 14 Number of Teeth
- 2.174 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Dia. | 1 1/2 in |
| Bushing Type | None |
| Length Through Bore | 2.437 in |
| Pitch Diameter | 2.228 in |
| Bore Range [Max] | 1 in |
| Belt Size | H |
| Outside Dia. | 2.1740 in |
| Finished Bore | N/A |
| Hub Type | B |
| Bore Range [Min] | 3/4 in |
| Bore Type | Reborable |
| Bushing Series | N/A |
| Type | PB |
| Hardened Teeth | With Hardened Teeth |
| Material | Steel |
| Belt Width | 1 1/2 in |
| No. of Teeth | 14 |
| Belt Pitch | 1/2 in |
| Hub Projection | 5/8 in |
| Weight | 1.8 LB |
| EAN or UPC | 697950150932 |
