Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 14 Number of Teeth
- 2.174 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | B |
| Pitch Diameter | 2.228 in |
| Bore Range [Max] | 1 in |
| No. of Teeth | 14 |
| Finished Bore | N/A |
| Outside Dia. | 2.1740 in |
| Bore Type | Reborable |
| Bushing Type | None |
| Hub Projection | 5/8 in |
| Length Through Bore | 2.437 in |
| Belt Size | H |
| Hub Dia. | 1 1/2 in |
| Bushing Series | N/A |
| Belt Pitch | 1/2 in |
| Belt Width | 1 1/2 in |
| Type | PB |
| Bore Range [Min] | 3/4 in |
| Hardened Teeth | With Hardened Teeth |
| Material | Steel |
| Weight | 1.8 LB |
| EAN or UPC | 697950150932 |
