Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 16 Number of Teeth
- 2.492 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Hub Type | B |
| Outside Dia. | 2.4920 in |
| Material | Steel |
| Hub Projection | 3/4 in |
| Length Through Bore | 2.562 in |
| Pitch Diameter | 2.546 in |
| Type | PB |
| Finished Bore | N/A |
| Belt Width | 1 1/2 in |
| Hub Dia. | 2 in |
| Belt Pitch | 1/2 in |
| Bore Range [Min] | 3/4 in |
| Bushing Series | N/A |
| Bushing Type | None |
| Bore Range [Max] | 1 1/4 in |
| Bore Type | Reborable |
| No. of Teeth | 16 |
| Hardened Teeth | With Hardened Teeth |
| Weight | 2.5 LB |
| EAN or UPC | 697950150994 |
