Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 16 Number of Teeth
- 2.492 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 3/4 in |
| Belt Pitch | 1/2 in |
| Hub Type | B |
| Hardened Teeth | With Hardened Teeth |
| Material | Steel |
| Bore Type | Reborable |
| Outside Dia. | 2.4920 in |
| Length Through Bore | 2.562 in |
| Bore Range [Max] | 1 1/4 in |
| Hub Dia. | 2 in |
| Belt Width | 1 1/2 in |
| Pitch Diameter | 2.546 in |
| Type | PB |
| No. of Teeth | 16 |
| Bushing Type | None |
| Bushing Series | N/A |
| Belt Size | H |
| Finished Bore | N/A |
| Hub Projection | 3/4 in |
| Weight | 2.5 LB |
| EAN or UPC | 697950150994 |
