Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 20 Number of Teeth
- 3.129 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Width | 1 in |
| Bore Range [Min] | 0.625 in |
| Material | Steel |
| Hub Type | B |
| Belt Size | H100 |
| Bore Range [Max] | 1.625 in |
| Finished Bore | N/A |
| Pitch Diameter | 3.183 in |
| Bushing Type | None |
| Hub Projection | 7/8 in |
| Bore Type | Reborable |
| Length Through Bore | 2.187 in |
| Type | DF-1 |
| Hardened Teeth | With Hardened Teeth |
| Belt Pitch | 0.5 in |
| No. of Teeth | 20 |
| Bushing Series | N/A |
| Outside Dia. | 3.129 in |
| Hub Dia. | 2 1/2 in |
| Weight | 3.4 LB |
| EAN or UPC | 697950151212 |
