Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 20 Number of Teeth
- 3.129 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 1.625 in |
| Hub Projection | 7/8 in |
| Bushing Type | None |
| Bushing Series | N/A |
| Type | DF-1 |
| Bore Range [Min] | 0.625 in |
| Length Through Bore | 2.187 in |
| Hub Type | B |
| Finished Bore | N/A |
| Outside Dia. | 3.129 in |
| Hardened Teeth | With Hardened Teeth |
| Belt Width | 1 in |
| Bore Type | Reborable |
| Belt Size | H100 |
| Material | Steel |
| Hub Dia. | 2 1/2 in |
| Belt Pitch | 0.5 in |
| No. of Teeth | 20 |
| Pitch Diameter | 3.183 in |
| Weight | 3.4 LB |
| EAN or UPC | 697950151212 |
