Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 22 Number of Teeth
- 1.381 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 0.2 in |
| Hub Type | B |
| Type | DF-1 |
| Set Screw Size | 8-32 x 1/8 |
| Belt Width | 0.25 in, 0.375 in |
| Bore Range [Min] | 0.25 in |
| Outside Dia. | 1.381 in |
| Material | Steel |
| Bore Range [Max] | 0.75 in |
| Finished Bore | N/A |
| Hub Dia. | 1 in |
| No. of Screws | 2 |
| Bushing Type | None |
| Hub Projection | 0.218 in |
| Bushing Series | N/A |
| No. of Teeth | 22 |
| Hardened Teeth | Without Hardened Teeth |
| Belt Size | XL037 |
| Pitch Diameter | 1.401 in |
| Length Through Bore | 0.94 in |
| Bore Type | Bushed |
| Weight | 0.22 LB |
| EAN or UPC | 697950110547 |
