Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 22 Number of Teeth
- 1.381 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Bushed |
| No. of Screws | 2 |
| Pitch Diameter | 1.401 in |
| Hub Projection | 0.218 in |
| Hub Dia. | 1 in |
| Belt Pitch | 0.2 in |
| Set Screw Size | 8-32 x 1/8 |
| Type | DF-1 |
| Hardened Teeth | Without Hardened Teeth |
| Belt Width | 0.25 in, 0.375 in |
| Bore Range [Max] | 0.75 in |
| Finished Bore | N/A |
| No. of Teeth | 22 |
| Hub Type | B |
| Bushing Type | None |
| Material | Steel |
| Belt Size | XL037 |
| Outside Dia. | 1.381 in |
| Bushing Series | N/A |
| Bore Range [Min] | 0.25 in |
| Length Through Bore | 0.94 in |
| Weight | 0.22 LB |
| EAN or UPC | 697950110547 |
