Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 28 Number of Teeth
- 4.404 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 28 |
| Hub Dia. | 3 5/8 in |
| Length Through Bore | 2.437 in |
| Bushing Type | None |
| Outside Dia. | 4.404 in |
| Bore Range [Min] | 0.75 in |
| Hub Type | B |
| Pitch Diameter | 4.456 in |
| Bushing Series | N/A |
| Material | Steel |
| Type | DF |
| Belt Pitch | 0.5 in |
| Belt Size | H |
| Belt Width | 1 in |
| Finished Bore | N/A |
| Hardened Teeth | With Hardened Teeth |
| Bore Range [Max] | 2.625 in |
| Hub Projection | 1 1/8 in |
| Bore Type | Reborable |
| Weight | 8.0 LB |
| EAN or UPC | 697950151762 |
