Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 28 Number of Teeth
- 4.404 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 0.5 in |
| No. of Teeth | 28 |
| Bore Range [Max] | 2.625 in |
| Belt Size | H |
| Outside Dia. | 4.404 in |
| Hardened Teeth | With Hardened Teeth |
| Bushing Type | None |
| Bore Range [Min] | 0.75 in |
| Hub Dia. | 3 5/8 in |
| Pitch Diameter | 4.456 in |
| Length Through Bore | 2.437 in |
| Material | Steel |
| Type | DF |
| Bushing Series | N/A |
| Bore Type | Reborable |
| Hub Type | B |
| Belt Width | 1 in |
| Hub Projection | 1 1/8 in |
| Finished Bore | N/A |
| Weight | 8.0 LB |
| EAN or UPC | 697950151762 |
