Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 30 Number of Teeth
- 3.595 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 1.875 in |
| Bore Range [Min] | 0.625 in |
| Bushing Series | N/A |
| Belt Pitch | 0.375 in |
| Belt Width | 1 in |
| Length Through Bore | 2.25 in |
| Finished Bore | N/A |
| Outside Dia. | 3.595 in |
| Pitch Diameter | 3.581 in |
| Type | PB |
| Hub Projection | 1 in |
| Belt Size | L100 |
| Material | Steel |
| Hub Dia. | 2 7/8 in |
| Bushing Type | None |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Reborable |
| Hub Type | B |
| No. of Teeth | 30 |
| Weight | 4.0 LB |
| EAN or UPC | 697950151953 |
