Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 22 Number of Teeth
- 6.017 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | A |
| Bushing Type | Taper-Lock |
| Pitch Diameter | 6.127 in |
| Finished Bore | N/A |
| Belt Pitch | 0.875 in |
| Bore Type | Bushed |
| Bore Range [Min] | 0.5 in |
| Bore Range [Max] | 2.5 in |
| Length Through Bore | 1.75 in |
| Type | KF |
| No. of Teeth | 22 |
| Bushing Series | 2517 |
| Material | Cast Iron |
| Outside Dia. | 6.017 in |
| Belt Size | XH |
| Width Across Teeth | 3.313 in |
| Belt Width | 3 in |
| Weight | 12.36 LB |
| EAN or UPC | 697950083384 |
