Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 22 Number of Teeth
- 6.017 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 2.5 in |
| Length Through Bore | 1.75 in |
| Belt Width | 3 in |
| Bushing Type | Taper-Lock |
| Material | Cast Iron |
| Finished Bore | N/A |
| Hub Type | A |
| Bore Type | Bushed |
| No. of Teeth | 22 |
| Outside Dia. | 6.017 in |
| Belt Size | XH |
| Pitch Diameter | 6.127 in |
| Width Across Teeth | 3.313 in |
| Belt Pitch | 0.875 in |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 2517 |
| Type | KF |
| Weight | 12.36 LB |
| EAN or UPC | 697950083384 |
