Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 2" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Base Wt. | 8.86 lb |
| Flow Controls | w/o Flow Controls |
| Slide Orientation | Right Hand (Standard) |
| Intermediate Stroke | N/A |
| Bearing Type | Composite Bearing |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Proximity Sensor Code | None |
| Bumpers - Slide | No Bumpers |
| Port Type | NPTF |
| Stroke | 2 in |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Weight per Inch | 0.48 lb |
| Slide Type | Thrust Slide |
| Pressure [Max] | 750 psi |
| Port Location | Standard (Position 1) |
| Proximity Sensor | No Proximity Sensor |
| Slide Configuration Option Code | A |
| Support Rod Diameter | 20 mm |
| Temperature Range [Min] | 0 °F |
| Positions | 2 Position |
| Cushions - Slide | No Cushions |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Support Rod Material | Steel |
| Port Size | 1/4 |
| Temperature Range [Max] | 165 °F |
| Series | HBT |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Cylinder Bore Size | 1.5 in |
| Cylinder Seal Material | Buna-N |
| Weight | 9.82 LB |
