Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 2" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Proximity Sensor Code | None |
| Temperature Range [Min] | 0 °F |
| Support Rod Material | Steel |
| Bumpers - Slide | No Bumpers |
| Slide Type | Thrust Slide |
| Proximity Sensor | No Proximity Sensor |
| Slide Orientation | Right Hand (Standard) |
| Intermediate Stroke | N/A |
| Cylinder Bore Size | 1.5 in |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Temperature Range [Max] | 165 °F |
| Flow Controls | w/o Flow Controls |
| Support Rod Diameter | 20 mm |
| Pressure [Max] | 750 psi |
| Bearing Type | Composite Bearing |
| Base Wt. | 8.86 lb |
| Port Type | NPTF |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Slide Configuration Option Code | A |
| Stroke | 2 in |
| Port Location | Standard (Position 1) |
| Port Size | 1/4 |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Cushions - Slide | No Cushions |
| Positions | 2 Position |
| Series | HBT |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Cylinder Seal Material | Buna-N |
| Weight per Inch | 0.48 lb |
| Weight | 9.82 LB |
