The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Both Ends)
Support Rod Material
Steel
Stroke Tolerance
+0.030 in / -0.000 in
Temperature Range [Max]
165 °F
Temperature Range [Min]
0 °F
Port Location
Standard (Position 1)
Slide Type
Thrust Slide
Intermediate Stroke
N/A
Weight per Inch
0.63 lb
Cushions - Slide
No Cushions
Stroke
8 in
Proximity Sensor
No Proximity Sensor
Positions
2 Position
Cylinder Bore Size
1.5 in
Port Size
1/4
Cylinder Seal Material
Buna-N
Slide Configuration Option Code
B4
Pressure [Max]
750 psi
Dowel Pin Holes
w/o Dowel Pin Holes
Port Type
NPTF
Proximity Sensor Code
None
Bearing Type
Composite Bearing w/Oversized Support Rods
Shock Absorbers - Slide
No Shock Absorber
Slide Orientation
Right Hand (Standard)
Support Rod Diameter
25 mm
Series
HBT
Base Wt.
9.83 lb
Cylinder Type
NFPA Hydraulic Cylinder
Flow Controls
w/o Flow Controls
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
