The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Port Location
Standard (Position 1)
Dowel Pin Holes
w/o Dowel Pin Holes
Positions
2 Position
Support Rod Diameter
25 mm
Cylinder Type
NFPA Hydraulic Cylinder
Intermediate Stroke
N/A
Slide Orientation
Right Hand (Standard)
Port Size
1/4
Stroke Tolerance
+0.030 in / -0.000 in
Weight per Inch
0.63 lb
Base Wt.
9.83 lb
Pressure [Max]
750 psi
Proximity Sensor
No Proximity Sensor
Bearing Type
Composite Bearing w/Oversized Support Rods
Cushions - Slide
No Cushions
Series
HBT
Cylinder Bore Size
1.5 in
Temperature Range [Min]
0 °F
Shock Absorbers - Slide
No Shock Absorber
Support Rod Material
Steel
Flow Controls
w/o Flow Controls
Slide Type
Thrust Slide
Port Type
NPTF
Temperature Range [Max]
165 °F
Stroke
8 in
Slide Configuration Option Code
B4
Proximity Sensor Code
None
Cylinder Seal Material
Buna-N
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Both Ends)
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
