Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 7" Stroke
- Steel Rails
- Composite Bearing
- 50 mm Bore ISO Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Series | HBT |
| Cylinder Seal Material | Buna-N |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Proximity Sensor | No Proximity Sensor |
| Slide Orientation | Right Hand (Standard) |
| Port Location | Standard (Position 1) |
| Bumpers - Slide | No Bumpers |
| Pressure [Max] | 150 psi |
| Support Rod Diameter | 25 mm |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Slide Type | Thrust Slide |
| Cushions - Slide | Cushioned (Both Ends) |
| Positions | 2 Position |
| Port Type | BSP |
| Temperature Range [Min] | 0 °F |
| Flow Controls | w/o Flow Controls |
| Bearing Type | Composite Bearing |
| Temperature Range [Max] | 165 °F |
| Slide Configuration Option Code | C |
| Cylinder Bore Size | 50 mm |
| Port Size | 3/8 |
| Cylinder Type | ISO Pneumatic Cylinder |
| Shock Absorbers - Slide | No Shock Absorber |
| Support Rod Material | Steel |
| Base Wt. | 14.35 lb |
| Proximity Sensor Code | None |
| Weight per Inch | 0.64 lb |
| Intermediate Stroke | N/A |
| Stroke | 7 in |
| Weight | 18.83 LB |
