Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Stroke | 9 in |
| Support Rod Diameter | 30 mm |
| Pressure [Max] | 150 psi |
| Shock Absorbers - Slide | No Shock Absorber |
| Flow Controls | w/o Flow Controls |
| Base Wt. | 24.45 lb |
| Cylinder Bore Size | 2.5 in |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Temperature Range [Max] | 165 °F |
| Bearing Type | Composite Bearing |
| Slide Orientation | Right Hand (Standard) |
| Cylinder Seal Material | Buna-N |
| Proximity Sensor Code | None |
| Temperature Range [Min] | 0 °F |
| Port Size | 3/8 |
| Slide Configuration Option Code | B4 |
| Cushions - Slide | No Cushions |
| Series | HBT |
| Proximity Sensor | No Proximity Sensor |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Positions | 2 Position |
| Port Type | NPTF |
| Support Rod Material | Steel |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Intermediate Stroke | N/A |
| Slide Type | Thrust Slide |
| Weight per Inch | 0.85 lb |
| Port Location | Standard (Position 1) |
| Weight | 32.1 LB |
