Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Bearing Type | Composite Bearing |
| Proximity Sensor | No Proximity Sensor |
| Slide Type | Thrust Slide |
| Stroke | 9 in |
| Port Size | 3/8 |
| Shock Absorbers - Slide | No Shock Absorber |
| Proximity Sensor Code | None |
| Cylinder Seal Material | Buna-N |
| Slide Configuration Option Code | B4 |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Port Location | Standard (Position 1) |
| Base Wt. | 24.45 lb |
| Support Rod Material | Steel |
| Temperature Range [Min] | 0 °F |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Temperature Range [Max] | 165 °F |
| Positions | 2 Position |
| Pressure [Max] | 150 psi |
| Support Rod Diameter | 30 mm |
| Port Type | NPTF |
| Series | HBT |
| Cylinder Bore Size | 2.5 in |
| Weight per Inch | 0.85 lb |
| Cushions - Slide | No Cushions |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Slide Orientation | Right Hand (Standard) |
| Flow Controls | w/o Flow Controls |
| Intermediate Stroke | N/A |
| Weight | 32.1 LB |
