Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Shock ready
- Slides without cylinders
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Shock Absorbers - Slide | No Shock Absorber |
| Port Size | 3/8 |
| Bearing Type | Composite Bearing |
| Cushions - Slide | No Cushions |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Port Location | Standard (Position 1) |
| Weight per Inch | 0.85 lb |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Positions | 2 Position |
| Port Type | NPTF |
| Proximity Sensor Code | None |
| Support Rod Material | Steel |
| Base Wt. | 24.45 lb |
| Slide Orientation | Right Hand (Standard) |
| Intermediate Stroke | N/A |
| Cylinder Seal Material | Buna-N |
| Temperature Range [Min] | 0 °F |
| Slide Type | Thrust Slide |
| Proximity Sensor | No Proximity Sensor |
| Support Rod Diameter | 30 mm |
| Bumpers - Slide | Bumpers (Both Ends) |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Temperature Range [Max] | 165 °F |
| Slide Configuration Option Code | B |
| Cylinder Bore Size | 2.5 in |
| Stroke | 9 in |
| Series | HBT |
| Flow Controls | w/o Flow Controls |
| Pressure [Max] | 750 psi |
| Weight | 32.1 LB |
