Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Shock ready
- Slides without cylinders
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Bumpers - Slide | Bumpers (Both Ends) |
| Shock Absorbers - Slide | No Shock Absorber |
| Series | HBT |
| Bearing Type | Composite Bearing |
| Positions | 2 Position |
| Slide Orientation | Right Hand (Standard) |
| Temperature Range [Max] | 165 °F |
| Port Type | NPTF |
| Cylinder Bore Size | 2.5 in |
| Slide Type | Thrust Slide |
| Support Rod Material | Steel |
| Intermediate Stroke | N/A |
| Cylinder Seal Material | Buna-N |
| Port Location | Standard (Position 1) |
| Pressure [Max] | 750 psi |
| Proximity Sensor Code | None |
| Temperature Range [Min] | 0 °F |
| Weight per Inch | 0.85 lb |
| Flow Controls | w/o Flow Controls |
| Cushions - Slide | No Cushions |
| Slide Configuration Option Code | B |
| Port Size | 3/8 |
| Stroke | 9 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Proximity Sensor | No Proximity Sensor |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Support Rod Diameter | 30 mm |
| Base Wt. | 24.45 lb |
| Weight | 32.1 LB |
