Find a Service Center
- Single Row Radial Bearing
- 3/8" ID x 7/8" OD x 9/32" Wide
- Double Shielded
description
- Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
- Improved ball groove finish
- Ground bores
- Grease packed
- Nylon seals
- Precision-ground on all contact surfaces
- Easy-to-use inch dimensions
- Medium loads
- Max speed range - 5000 - 6000 rpm
- Through-hardened bearing steel
- Nylon retainer standard
- Greased, double-sealed, or double-shielded standard
- Available single sealed or single shielded, open, and with or without grease
| Radial Internal Clearance Specification | Normal Clearance |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| Inner Ring Width | 9/32 in |
| Material | Steel |
| Seal Material | Metal |
| No. in Set | Single Bearing |
| Sealed Width | 11/32 in |
| Lubricant | General Purpose |
| Limiting Speed - Grease | 6000 rpm |
| Shielded Width | 9/32 in |
| Outer Ring Width | 9/32 in |
| Cage Material | Nylon |
| Limiting Speed - Oil | 6000 rpm |
| O.D. Type | Straight |
| Ball Material | Steel |
| Pre Lubricant | None |
| O.D. | 0.875 in |
| Dynamic Load Rating | 644 lbf |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| I.D. | 3/8 in |
| Width | 9/32 in |
| Precision | Standard |
| Rows of Balls | Single |
| Enclosure | Double Shielded |
| Contact Angle | 0° |
| Fillet Radius | 0.015 in |
| Origin | Single Row Radial |
| Seal Type | Non-Contact Seals |
| Static Load Rating [Max] | 255 lbf |
| icNumber | 7695900 |
| Radial Internal Clearance | Normal |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Cage Type | Plastic |
| Inch/Metric | Inch Bore |
| Limiting Speed | 6000 rpm |
| Weight | 0.03 LB |
| EAN or UPC | 637400291327 |
