Find a Service Center
- Single Row Radial Bearing
- 3/8" ID x 7/8" OD x 9/32" Wide
- Double Shielded
description
- Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
- Improved ball groove finish
- Ground bores
- Grease packed
- Nylon seals
- Precision-ground on all contact surfaces
- Easy-to-use inch dimensions
- Medium loads
- Max speed range - 5000 - 6000 rpm
- Through-hardened bearing steel
- Nylon retainer standard
- Greased, double-sealed, or double-shielded standard
- Available single sealed or single shielded, open, and with or without grease
| Seal Type | Non-Contact Seals |
| No. in Set | Single Bearing |
| icNumber | 7695900 |
| Pre Lubricant | None |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 0° |
| Dynamic Load Rating | 644 lbf |
| I.D. | 3/8 in |
| Width | 9/32 in |
| Bearing Type | Radial |
| O.D. Type | Straight |
| Limiting Speed - Oil | 6000 rpm |
| Enclosure | Double Shielded |
| Material | Steel |
| Shielded Width | 9/32 in |
| Cage Material | Nylon |
| Sealed Width | 11/32 in |
| Precision | Standard |
| Limiting Speed | 6000 rpm |
| Inch/Metric | Inch Bore |
| Fillet Radius | 0.015 in |
| Preload Level | None |
| Limiting Speed - Grease | 6000 rpm |
| Outer Ring Width | 9/32 in |
| Inner Ring Width | 9/32 in |
| Rows of Balls | Single |
| Ball Material | Steel |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Origin | Single Row Radial |
| O.D. | 0.875 in |
| Radial Internal Clearance | Normal |
| Lubricant | General Purpose |
| Cage Type | Plastic |
| Static Load Rating [Max] | 255 lbf |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Material | Metal |
| Locking Device | No Locking Device |
| Capacity | Standard Capacity |
| Weight | 0.03 LB |
| EAN or UPC | 637400291327 |
