Find a Service Center
- 1" Center Distance
- 30:1 Ratio
- Shaft Input
- Left & Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Always follow lock out and tag out procedures when working on conveyor systems.
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.125 hp @ 1800 rpm |
| Input Configuration | Shaft Input |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Frame Size | Shaft Input, Not a C-Face |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Width | 2 1/2 in |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Worm Position | Universal |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Family Name | Std Unit |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Shaft Assembly Code | H |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Center Distance | 1 in |
| Bolt Center Length x Bolt Center Width | 3 3/4 in x 2 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Torque Out @ 1750 rpm | 150 in lb |
| Output Torque @ RPM | 133 in lb @ 1150 rpm, 150 in lb @ 1750 rpm |
| Base to Centerline of Output Shaft | 1 5/16 in |
| Max. Input HP @ 100 rpm | 0.013 hp |
| Box Length | 3 1/4 in |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Motor Application | General Purpose |
| Lubrication | None |
| Housing Material | Cast Iron |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Reduction Type | Single Reduction |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 3/8 in |
| Bolt Center | 3 3/4" x 2 7/8" |
| Input HP @ RPM | 0.1 hp @ 1150 rpm, 0.2 hp @ 1750 rpm |
| Torque Out @ 1150 rpm | 133 in lb |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Frame | N/A |
| Ratio | 30:1 |
| Output (Shaft or Bore) Size | 1/2 in |
| Use With | 710 |
| Output Configuration | Left & Right Output |
| Box Height | 3 5/8 in |
| Weight | 6.1 LB |
| EAN or UPC | 781711515983 |
