Find a Service Center
- .94" Center Distance
- 15:1 Ratio
- Special Frame
- C-Face Quilled Input
- Left Output
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Thrust Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Max. Overhung Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Torque Out @ 1150 rpm | N/A |
| Bore Code | SP |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Frame | Special |
| Output Configuration | Left Output |
| Center Distance | 0.94 in |
| Box Height | 3 19/32 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Ratio | 15:1 |
| Lubrication | Mobil SHC634 Synthetic |
| Input HP @ RPM | 0.06 hp @ 1750 rpm |
| Fan Cooled | No |
| Use With | 309 |
| Box Length | 4 1/32 in |
| Motor Application | General Purpose |
| Reduction Type | Single Reduction |
| Base to Centerline of Input Shaft | N/A |
| Installed Options | Low Horizontal Base |
| Bolt Center Length x Bolt Center Width | 2 3/4 in x 4 3/4 in |
| Input Configuration | C-Face Quilled |
| Worm Position | Top |
| Bolt Center | 2 3/4" x 2 3/4" |
| Output Torque @ RPM | 22 in lb @ 1750 rpm |
| Family Name | F |
| Shaft Assembly Code | G |
| Washdown Duty | No |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Torque Out @ 1750 rpm | 22 in lb |
| Frame Size | SP |
| Input (Shaft or Bore) Size | 1/2 in |
| Box Width | 3 1/2 in |
| Base to Centerline of Output Shaft | 1 9/16 in |
| Weight | 7.0 LB |
