Find a Service Center
Alternate Products
- Finished Steel Gear
- 12 Diametral Pitch
- 14.5° Pressure Angle
- 24 Teeth
- 2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Base oil viscosity: 500 SUS @ 100 °F
- Parallel shaft applications
- More cost effective, quieter running and metallic options
- Reliability from steel, cast iron and brass
- Four ball wear test 40 kg: 63 mm
| Outside Dia. | 2.17 in |
| Pitch Diameter | 2 in |
| Bore Type | Finished |
| Keyway | w/Setscrew |
| Set Screw | Yes |
| Torque at 1800 RPM | 145 lb/in |
| Set Screw Size | 7/8 |
| Torque at 900 RPM | 209 lb/in |
| Material | Steel |
| Hub Dia. | 1.64 in |
| Length Through Bore | 1.25 in |
| No. of Teeth | 24 |
| Origin | Finished Bore |
| Pressure Angle | 14.5 ° |
| Diametral Pitch | 12 |
| Torque at 300 RPM | 296 lb/in |
| Torque at 200 RPM | 317 lb/in |
| Bore Size | 0.875 in |
| Torque at 1200 RPM | 182 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 600 RPM | 245 lb/in |
| Weight | 0.901 LB |
| EAN or UPC | 781711460788 |
