SSF2S-119

Intermediate Duty 2-Bolt Flange Unit

Item #100936377

1.19 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Internal Clearance	Standard
Measure Units	Inch
Mounted Unit Duty	Intermediate
Bolt Size	0.38 in
Bore Size - Inch	1.188
Expansion	No
Housing Construction	Two Piece
Length Through Bore	1.16 in
Retainer Material	Molded Fiber Glass Reinforced Nylon
Foot Height	0.2 in
Overall Width	3.31 in
Inner Ring OD (in)	1.594
Housing Width	3.31 in
Housing Width (in)	3.3125
Heat Treat Method (Inner Race)	Zone-Hardened
Bore Type	Straight
Radial Dynamic Load Capacity	4381 lb
Overall Length (in)	4.438
Housing Material	Stamped Steel
Lubrication	Lithium Complex NLGI 2 Grease
Retainer Type	Ball Riding Retainer
Outer Ring Land Profile	Standard
Bolt Size (in)	0.3750
Radial Dynamic Load Capacity (lb)	4381
Bore Shape	Straight
Foot Height (in)	0.203
Finish	Uncoated
Overall Height (in)	1.1563
I.D.	1.19 in
RPM [Max]	3000 rpm
Radial Static Load Capacity (lb)	2567
Seal Type	Single Lip Contact Seal
Pilot Configuration	No Pilot
End Cap	No
Radial Static Load Capacity	2567 lb
Inner Race Heat Treat Method	Zone-Hardened
Replaceable Insert	Yes
Length Through Bore (in)	1.1563
Insert Material	52100 Bearing Steel
Overall Height to Inner Ring (in)	1.156
Overall Width (in)	3.3125
Maximum Operating Temperature	200
Centerline to Front Face (in)	0.781
Overall Height to Inner Ring	1.16 in
Insert No.	LS-119
Flange Type	2-Bolt Flange
Inch/Metric	Inch
Relubricatable	Yes
Duty Series	Intermediate
Inner Race Length (in)	1.1563
Bolt Center-to-Center Length (in)	3.5625
Bearing Insert Coating	Uncoated
Misalignment Type	Static Only
Weight	1.04 LB
EAN or UPC	662460337005