SSF2S-119

Intermediate Duty 2-Bolt Flange Unit

Item #100936377

1.19 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Overall Height to Inner Ring (in)	1.156
Overall Height to Inner Ring	1.16 in
Overall Length (in)	4.438
Bore Shape	Straight
Internal Clearance	Standard
Housing Width	3.31 in
End Cap	No
Bore Size - Inch	1.188
Radial Static Load Capacity (lb)	2567
Length Through Bore	1.16 in
Misalignment Type	Static Only
Relubricatable	Yes
Radial Dynamic Load Capacity	4381 lb
Heat Treat Method (Inner Race)	Zone-Hardened
RPM [Max]	3000 rpm
Replaceable Insert	Yes
Finish	Uncoated
Inner Ring OD (in)	1.594
Retainer Type	Ball Riding Retainer
Overall Width	3.31 in
Housing Material	Stamped Steel
Bearing Insert Coating	Uncoated
Bolt Size (in)	0.3750
Bolt Size	0.38 in
Flange Type	2-Bolt Flange
Pilot Configuration	No Pilot
Overall Width (in)	3.3125
Bolt Center-to-Center Length (in)	3.5625
Bore Type	Straight
Mounted Unit Duty	Intermediate
Insert Material	52100 Bearing Steel
Inch/Metric	Inch
Radial Dynamic Load Capacity (lb)	4381
Length Through Bore (in)	1.1563
Radial Static Load Capacity	2567 lb
I.D.	1.19 in
Maximum Operating Temperature	200
Overall Height (in)	1.1563
Housing Width (in)	3.3125
Housing Construction	Two Piece
Foot Height	0.2 in
Inner Race Length (in)	1.1563
Lubrication	Lithium Complex NLGI 2 Grease
Measure Units	Inch
Foot Height (in)	0.203
Duty Series	Intermediate
Centerline to Front Face (in)	0.781
Inner Race Heat Treat Method	Zone-Hardened
Insert No.	LS-119
Seal Type	Single Lip Contact Seal
Outer Ring Land Profile	Standard
Expansion	No
Retainer Material	Molded Fiber Glass Reinforced Nylon
Weight	1.04 LB
EAN or UPC	662460337005