SSF2S-120S

Intermediate Duty 2-Bolt Flange Unit

Item #100736641

1.25 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Overall Height (in)	1.1563
Misalignment Type	Static Only
Housing Width	3.31 in
Bolt Size	0.38 in
Overall Width (in)	3.3125
Bolt Center-to-Center Length (in)	3.5630
Bore Size - Inch	1.25
Mounted Unit Duty	Intermediate
Housing Width (in)	3.3125
End Cap	No
Heat Treat Method (Inner Race)	Zone-Hardened
Overall Width	3.31 in
RPM [Max]	3000 rpm
Retainer Type	Ball Riding Retainer
Length Through Bore	1.16 in
Relubricatable	Yes
Outer Ring Land Profile	Standard
Maximum Operating Temperature	200
Retainer Material	Molded Fiber Glass Reinforced Nylon
Radial Dynamic Load Capacity	4381 lb
Radial Static Load Capacity (lb)	2567
Seal Type	Single Lip Contact Seal
Internal Clearance	Standard
Flange Type	2-Bolt Flange
Radial Dynamic Load Capacity (lb)	4381
Replaceable Insert	Yes
Measure Units	Inch
Centerline to Front Face (in)	0.781
Duty Series	Intermediate
Overall Length (in)	4.438
Bolt Size (in)	.3750
Overall Height to Inner Ring	1.16 in
Length Through Bore (in)	1.1563
Inner Ring OD (in)	1.594
Inner Race Heat Treat Method	Zone-Hardened
Bore Type	Straight
Finish	Uncoated
Pilot Configuration	No Pilot
Insert Material	52100 Bearing Steel
Bore Shape	Straight
Expansion	No
Inner Race Length (in)	1.1563
Bearing Insert Coating	Uncoated
Radial Static Load Capacity	2567 lb
Insert No.	LS-120S
Inch/Metric	Inch
Housing Construction	Two Piece
Foot Height (in)	0.203
I.D.	1.25 in
Overall Height to Inner Ring (in)	1.156
Housing Material	Stamped Steel
Foot Height	0.2 in
Lubrication	Lithium Complex NLGI 2 Grease
Weight	1.0 LB
EAN or UPC	662460337012