SSF2S-120S

Intermediate Duty 2-Bolt Flange Unit

Item #100736641

1.25 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Bore Type	Straight
Centerline to Front Face (in)	0.781
Insert No.	LS-120S
Housing Construction	Two Piece
Radial Static Load Capacity (lb)	2567
Heat Treat Method (Inner Race)	Zone-Hardened
Finish	Uncoated
Overall Height to Inner Ring	1.16 in
Radial Dynamic Load Capacity (lb)	4381
Bolt Size	0.38 in
Inner Ring OD (in)	1.594
Misalignment Type	Static Only
Replaceable Insert	Yes
Retainer Material	Molded Fiber Glass Reinforced Nylon
Outer Ring Land Profile	Standard
Insert Material	52100 Bearing Steel
Housing Material	Stamped Steel
Bolt Center-to-Center Length (in)	3.5630
Measure Units	Inch
Radial Dynamic Load Capacity	4381 lb
Length Through Bore	1.16 in
Seal Type	Single Lip Contact Seal
Housing Width	3.31 in
Lubrication	Lithium Complex NLGI 2 Grease
Overall Width	3.31 in
I.D.	1.25 in
Housing Width (in)	3.3125
Overall Width (in)	3.3125
Pilot Configuration	No Pilot
Overall Height to Inner Ring (in)	1.156
Length Through Bore (in)	1.1563
Bore Shape	Straight
Overall Length (in)	4.438
Bolt Size (in)	.3750
Internal Clearance	Standard
Overall Height (in)	1.1563
Expansion	No
Bearing Insert Coating	Uncoated
Inner Race Length (in)	1.1563
Foot Height (in)	0.203
Inner Race Heat Treat Method	Zone-Hardened
Flange Type	2-Bolt Flange
Relubricatable	Yes
Bore Size - Inch	1.25
Maximum Operating Temperature	200
Foot Height	0.2 in
Radial Static Load Capacity	2567 lb
Retainer Type	Ball Riding Retainer
End Cap	No
Duty Series	Intermediate
Mounted Unit Duty	Intermediate
RPM [Max]	3000 rpm
Inch/Metric	Inch
Weight	1.0 LB
EAN or UPC	662460337012