Find a Service Center
- Size 4
- Vertical, Single, Down Output Shaft w/Clockwise Rotation
- Horizontal Shaft Input, Facing You
- 1:1 Ratio
features
- Carburized, lapped, and matched AGMA rated spiral bevel gears provide long life and quiet operation
- Commercially available tapered roller bearings provide maximum catalog load capacity
- Corrosion-resistant aluminum and rugged, cast iron housings are line bored for precise gear and bearing alignment
- Double lip contact oil seals ride on hardened plunge ground shafts for leak-free operation
- Integral machined base provides a precision-mounting surface for critical shaft alignment
caution
- This guard has been shown to reduce the risk and severity of injury from being drawn between the roll and belt. This device cannot guarantee against abrasive or other types of injury incurred from contact with a moving conveyor belt or roll.
| Gear Style | Spiral Bevel |
| Max. Overhung Load @ 1750 rpm | 233 lb/in |
| Torque Out @ 1750 rpm | 260 in lb |
| Bolt Hole Pattern | 4 7/8 in x 4 7/8 in |
| Unit Size | 4 |
| Box Length | 8 9/16 in |
| Input Relation to Base | Horizontal |
| Input Configuration | Shaft Input |
| Torque Out @ 1150 rpm | 295 in lb |
| Relative Shaft Rotation | Clockwise |
| Ratio | 1:1 |
| Box Width | 6 in |
| Input (Shaft or Bore) Size | 3/4 in |
| Shaft Arrangement | #12 |
| Washdown Duty | No |
| Box Height | 3 in |
| Input Shaft Position | Facing You |
| Output Relation to Base | Vertical |
| Output (Shaft or Bore) Size | 3/4 in |
| Output RPM @ 1750 rpm Input | 1750 rpm |
| Output Configuration | Single |
| Bearing Type | Roller Bearing |
| Output Shaft Position | Down |
| Weight | 12.4 LB |
| EAN or UPC | 662288231554 |
