Find a Service Center
Alternate Products
- Duplex Set
- 0.9385" ID x 2.4409" OD x 5/8" Wide
- Extra Precision
- Universal Mounting
- 1,000 lb Preload
description
- Series L nonseparable angular contact bearings have cutaway shoulders on both the inner and outer rings. They can support very high thrust loads in one direction or combinations of radial and thrust loads, but not radial loading alone. They are designed to provide machine tool drive systems with extreme axial rigidity, low drag torque and minimal lateral runout.
applications
- NC machine tools
- Ball screw supports
- Tool frames
- Cross slides
- X-Y table positioners
- Transfer tables
caution
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
| Dynamic Thrust Capacity | 3850 lb |
| Precision Level | Extra Precision (ABEC 7) |
| Contact Angle | 65° |
| Extended Thrust Dynamic Load Rating | N/A |
| O.D. Type | Straight |
| Axial Spring Constant | 6.6 lb/in |
| Bearing Arrangement | Universal |
| Drag Torque of Preloaded Set | 2.8 lb/in |
| Preload Level | Heavy |
| Fillet Radius | 0.04 in |
| No. in Set | Duplex Set |
| Preload Amount | 1000 lbf |
| Ball Dia. | 1/4 in |
| Enclosure | Open |
| Housing Shoulder Diameter | 2.13 in |
| Bearing Type | Ball Screw Support Bearing |
| Lubricant | Oil Preservative |
| O.D. | 2.44094 in |
| Cage Material | Phenolic |
| Ball Material | Steel |
| No. of Balls | 21 |
| Material | Steel |
| Radial Internal Clearance Specification | Normal Clearance |
| Width of Set | 1 1/4 in |
| Bore Type | Round Bore, Inch Type |
| I.D. | 0.9385 in |
| Limiting Speed - Oil | 2400 rpm |
| Weight | 1140.65 LB |
| EAN or UPC | 4054364935610 |
