Find a Service Center
- Duplex Set
- 0.9385" ID x 2.4409" OD x 5/8" Wide
- Extra Precision
- Universal Mounting
- 1,000 lb Preload
description
- Series L nonseparable angular contact bearings have cutaway shoulders on both the inner and outer rings. They can support very high thrust loads in one direction or combinations of radial and thrust loads, but not radial loading alone. They are designed to provide machine tool drive systems with extreme axial rigidity, low drag torque and minimal lateral runout.
applications
- NC machine tools
- Ball screw supports
- Tool frames
- Cross slides
- X-Y table positioners
- Transfer tables
caution
- Not recommended for new applications.
| Housing Shoulder Diameter | 2.13 in |
| Width of Set | 1 1/4 in |
| Contact Angle | 65° |
| Drag Torque of Preloaded Set | 2.8 lb/in |
| Lubricant | Exxon Andok C |
| Bore Type | Round Bore, Inch Type |
| Axial Spring Constant | 6.6 lb/in |
| O.D. Type | Straight |
| Enclosure | Open |
| Radial Internal Clearance Specification | Normal Clearance |
| Limiting Speed - Oil | 2400 rpm |
| Ball Material | Steel |
| Preload Level | Heavy |
| Fillet Radius | 0.04 in |
| Extended Thrust Dynamic Load Rating | N/A |
| Dynamic Thrust Capacity | 3850 lb |
| Bearing Arrangement | Universal |
| Ball Dia. | 1/4 in |
| O.D. | 2.44094 in |
| Preload Amount | 1000 lbf |
| No. in Set | Duplex Set |
| Bearing Type | Ball Screw Support Bearing |
| No. of Balls | 21 |
| Precision Level | Extra Precision (ABEC 7) |
| Cage Material | Phenolic |
| Material | Steel |
| I.D. | 0.9385 in |
| Weight | 1.0 LB |
| EAN or UPC | 697150090014 |
