Find a Service Center
- Radial Shaft Seal
- 15 7/8 in Shaft Dia
- 17 3/4 in Housing Bore Diameter
- 7/8 in Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Pressure | 10 psi |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Material | Nitrile |
| Construction | HDS1 |
| Shaft Dia. | 15.875 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Lip Type | Single Lip w/Spring |
| Temperature Range [Max] | 250 °F |
| Case Construction | Steel Case w/Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 17 3/4 in |
| Seal Design | Bonded Design |
| Weight | 6.003 LB |
| EAN or UPC | 85311127493 |
