Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 7/16" Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Shaft Dia. | 1.4375 in |
| Bolt Size | 1/2 in |
| Bolt Holes | 2 |
| Pedestal | P 01 |
| Housing Material | Cast Iron |
| Insert Type | Split Steel Insert |
| Seal Type | Triple Labyrinth Seals |
| Bolt Hole Spacing Range [Min] | 6.75 |
| Bolt Hole Spacing | 7 1/8 in |
| Axial Load | 720 lbf |
| Inch/Metric | Inch |
| Housing Construction | 2 Piece |
| Dynamic Load Rating | 14600 lbf |
| Locking Device | Clamping Ring Collar |
| Bearing Design | Expansion |
| End Type | Open End |
| Base Height | 7/8 in |
| Temperature Range [Max] | 212 °F |
| Static Load Rating [Max] | 15100 lbf |
| Base Length | 9 in |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Series | 01 Series |
| Mounted Unit Duty | Heavy-Duty |
| Base Width | 2 3/8 in |
| Temperature Range [Min] | 32 °F |
| Lubrication | Relubricatable |
| Pillow Block Type | Thru-Bolt |
| Housing Height | 5 1/2 in |
| RPM [Max] | 5400 rpm |
| Bearing Type | Split Cylindrical |
| Weight | 11.682 LB |
| EAN or UPC | 7316576849503 |
