Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 7/16" Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| End Type | Open End |
| Base Width | 2 3/8 in |
| Bearing Type | Split Cylindrical |
| Bolt Holes | 2 |
| Insert Type | Split Steel Insert |
| Temperature Range [Max] | 212 °F |
| Base Height | 7/8 in |
| Housing Height | 5 1/2 in |
| Base Length | 9 in |
| Housing Material | Cast Iron |
| Mounted Unit Duty | Heavy-Duty |
| RPM [Max] | 5400 rpm |
| Housing Construction | 2 Piece |
| Bolt Hole Spacing Range [Min] | 6 3/4 in |
| Dynamic Load Rating | 14600 lbf |
| Axial Load | 720 lbf |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 1.4375 in |
| Seal Type | Triple Labyrinth Seals |
| Bolt Size | 1/2 in |
| Series | 01 Series |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 7 1/8 in |
| Locking Device | Clamping Ring Collar |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Pedestal | P 01 |
| Static Load Rating [Max] | 15100 lbf |
| Temperature Range [Min] | 32 °F |
| Bearing Design | Non-Expansion |
| Weight | 11.726 LB |
| EAN or UPC | 7316576849510 |
