Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 1/2" Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Electrical machinery
- Mechanical handling
- Conveyors
- Paper manufacturing
- Fans
- Haulage
- Winders
- Headgear
- Marine
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Bolt Holes | 2 |
| Series | 01 Series |
| RPM [Max] | 5400 rpm |
| Bolt Hole Spacing Range [Min] | 6.75 |
| Dynamic Load Rating | 14600 lbf |
| Shaft Dia. | 1.5 in |
| Housing Construction | 2 Piece |
| Mounted Unit Duty | Heavy-Duty |
| End Type | Open End |
| Lubrication | Relubricatable |
| Axial Load | 720 lbf |
| Housing Height | 5 1/2 in |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Pillow Block Type | Thru-Bolt |
| Base Height | 7/8 in |
| Insert Type | Split Steel Insert |
| Pedestal | P 01 |
| Temperature Range [Min] | 32 °F |
| Locking Device | Clamping Ring Collar |
| Seal Type | Triple Labyrinth Seals |
| Inch/Metric | Inch |
| Bearing Type | Split Cylindrical |
| Housing Material | Cast Iron |
| Bolt Hole Spacing | 7 1/8 in |
| Static Load Rating [Max] | 15100 lbf |
| Base Width | 2 3/8 in |
| Base Length | 9 in |
| Bolt Size | 1/2 in |
| Temperature Range [Max] | 212 °F |
| Bearing Design | Non-Expansion |
| Weight | 11.638 LB |
| EAN or UPC | 7316579323307 |
